IEEE802.1X Network Setting Items

IEEE802.1X (Wired LAN)

You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired LAN).

EAP Type

Select an option for an authentication method between the printer and a RADIUS server.

EAP-TLS

You need to obtain and import a CA-signed certificate.

PEAP-TLS

EAP-TTLS

You need to configure a password.

PEAP/MSCHAPv2

User ID

Configure an ID to use for an authentication of a RADIUS server.

Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Password

Configure a password to authenticate the printer.

Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. If you are using a Windows server as a RADIUS server, you can enter up to 127 characters.

Confirm Password

Enter the password you configured for confirmation.

Server ID

You can configure a server ID to authenticate with a specified RADIUS server. Authenticator verifies whether a server ID is contained in the subject/subjectAltName field of a server certificate that is sent from a RADIUS server or not.

Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Certificate Validation

You can set certificate validation regardless of the authentication method. Import the certificate in CA Certificate.

Anonymous Name

If you select PEAP-TLS, EAP-TTLS or PEAP/MSCHAPv2 for EAP Type, you can configure an anonymous name instead of a user ID for a phase 1 of a PEAP authentication.

Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Encryption Strength

You can select one of the followings.

High

AES256/3DES

Middle

AES256/3DES/AES128/RC4