Protocols you can Enable or Disable

Bonjour Settings

You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so on.

SLP Settings

You can enable or disable the SLP function. SLP is used for push scanning and network searching in EpsonNet Config.

WSD Settings

You can enable or disable the WSD function. When this is enabled, you can add WSD devices, and print from the WSD port.

LLTD Settings

You can enable or disable the LLTD function. When this is enabled, it is displayed on the Windows network map.

LLMNR Settings

You can enable or disable the LLMNR function. When this is enabled, you can use name resolution without NetBIOS even if you cannot use DNS.

LPR Settings

You can specify whether or not to allow LPR printing. When this is enabled, you can print from the LPR port.

RAW(Port9100) Settings

You can specify whether or not to allow printing from the RAW port (Port 9100). When this is enabled, you can print from the RAW port (Port 9100).

RAW(Custom Port) Settings

You can specify whether or not to allow printing from the RAW port (custom port). When this is enabled, you can print from the RAW port (custom port).

IPP Settings

You can specify whether or not to allow printing from IPP. When this is enabled, you can print over the Internet.

FTP Settings

You can specify whether or not to allow FTP printing. When this is enabled, you can print over an FTP server.

SNMPv1/v2c Settings

You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices, monitoring, and so on.

SNMPv3 Settings

You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices, monitoring, etc.