Set when using AirPrint printing.
Access Web Config and select the Network tab > AirPrint Setup.
|
Items |
Explanation |
|---|---|
|
Bonjour Service Name |
Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E). |
|
Bonjour Location |
Enter location information such as the printer's placement within 127 bytes or less in Unicode (UTF-8). |
|
Geolocation Latitude and Longitude (WGS84) |
Enter the printer's location information. This entry is optional. Enter values by using WGS-84 datum, which separates latitude and longitude with a comma. You can enter -90 to +90 for the latitude value, and -180 to +180 for the longitude value. You can enter less than a decimal to the sixth place, and you can omit "+". |
|
Top Priority Protocol |
Select top priority protocol from IPP and Port9100. |
|
Wide-Area Bonjour |
Set whether or not to use Wide-Area Bonjour. If you use it, the printers must be registered on the DNS server to be able to search the printer over the segment. |
|
Require PIN Code when using IPP printing |
Select whether or not to require a PIN code when using IPP printing. If you select Yes, IPP print jobs without PIN codes are not saved in the printer. |
|
Enable AirPrint |
IPP, Bonjour, AirPrint are enabled, and IPP is established only with secure communication. |