AM-C10000 Series

User's Guide

> Administrator Information > Managing the Printer > Updating the Firmware > Updating Firmware Using Web Config

Updating Firmware Using Web Config

When the printer can connect to the Internet, you can update the firmware from Web Config.

  1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

    You can check the printer's IP address using the following menu.

    • Network connected to the printer's built-in LAN port
      Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
    • Network connected to the Wireless LAN Interface-P1
      Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

  3. Select the following menu.

    Device Management tab > Firmware Update

  4. Click Start, and then follow the on-screen instructions.

    The firmware confirmation starts, and the firmware information is displayed if the updated firmware exists.

Note:

You can also update the firmware using Epson Device Admin. You can visually confirm the firmware information on the device list. It is useful when you want to update multiple devices' firmware. See the Epson Device Admin guide or help for more details.

Related Information