AM-C10000 Series

User's Guide

> Administrator Information > Managing the Printer > Managing the Network Connection > Configuring Wi-Fi Direct Settings

Configuring Wi-Fi Direct Settings

You can check or configure the Wi-Fi Direct Settings.

Note:

For models that support Wi-Fi, this item is displayed when the Wireless LAN Interface is installed.

On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

You can check the printer's IP address using the following menu.
- Network connected to the printer's built-in LAN port
  
  Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
- Network connected to the Wireless LAN Interface-P1
  
  Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select the following menu.

Network tab >Wi-Fi Direct
Select each item.
- Wi-Fi Direct
  
  You can specify whether or not to enable the Wi-Fi Direct.
- SSID
  
  You can change the SSID (Network Name).
- Password
  
  When changing the Wi-fi Direct password, enter a new password.
- Frequency Range
  
  Select the frequency range to be used in Wi-Fi Direct.
- IP Address
  
  Select the IP Address setting method from Auto or Manual. If you select Manual, enter the IP address.
Click Next.

A confirmation message is displayed.

Note:

To reset the Wi-Fi Direct settings, click the Restore Default Settings button.
Click OK.

The printer is updated.