AM-C10000 Series

User's Guide

> Administrator Information > Managing the Printer > Configuring Sounds

Configuring Sounds

Configure sounds that occur when operating the control panel, printing, faxing and other settings.

Note:

You can also set up from the printer’s control panel.

Settings > General Settings > Basic Settings > Sounds

On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

You can check the printer's IP address using the following menu.
- Network connected to the printer's built-in LAN port
  
  Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
- Network connected to the Wireless LAN Interface-P1
  
  Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select the following menu.

Device Management tab > Sound
Select the following items as necessary.
- Normal Mode
  
  Set the sound when the printer is set to Normal Mode.
- Quiet Mode
  
  Set the sound when the printer is set to Quiet Mode.
  
  This is enabled when the one of the following items is enabled.
  - Printer's control panel:
    
    Settings > General Settings > Printer Settings > Quiet Mode
    
    Settings > General Settings > Fax Settings > Receive Settings > Print Settings > Quiet Mode
  - Web Config :
    
    Fax tab > Print Settings > Quiet Mode
Click OK.