Creating a User Account

1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

   You can check the printer's IP address using the following menu.

   • Network connected to the printer's built-in LAN port
     Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
   • Network connected to the Wireless LAN Interface-P1
     Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select the following menu.

   Product Security tab > Access Control Settings > User Settings

4. Click Add for the number you want to register.

   Important:

   When using the printer with the authentication system of Epson or other companies, register the user name of the restriction setting in number 2 to number 10.

   Application software such as the authentication system uses number one, so that the user name is not displayed on the printer's control panel.

5. Configure each item.

   • User Name :
     Enter the name displayed on the user name list between 1 and 14 characters long using alphanumeric characters.
   • Password :
     Enter a password between 0 and 70 characters long in ASCII (0x20-0x7E). When initializing the password, leave it blank.
   • Select the check box to enable or disable each function.
     Select the functions that you permit the account to use.
   Note:

   When the password policy is available, enter a password that meets the requirement.

   You can set the password policy by selecting the Product Security tab > Password Policy.

6. Click Apply.

   Return to the user setting list after a specific length of time.

   Check that the user name you registered on User Name is displayed and Add has changed to Edit.