> Preparing the Printer and Making Initial Settings > Preparing and Setting Up the Printer According to Use > Contacts Registration > Exporting and Importing Contacts > Exporting and Importing Contacts Using Web Config > Importing Contacts Using Web Config

Importing Contacts Using Web Config

If you have a printer that allows you to backup contacts and is compatible with this printer, you can register contacts easily by importing the backup file.

Note:

For instructions on how to back up contacts on the other printer, see the other printer's documentation.

Follow the steps below to import the contacts to this printer.

On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

You can check the printer's IP address using the following menu.
- Network connected to the printer's built-in LAN port
  
  Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
- Network connected to an optional Ethernet board
  
  Settings > General Settings > Network Settings > Additional > Network Status > Wired LAN Status
- Network connected to the Wireless LAN Interface-P1
  
  Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select the following menu.

Device Management > Export and Import Setting Value > Import
Select the backup file you created in File, enter the password, and then click Next.
Select the Contacts checkbox, and then click Next.

AM-C10000 Series

User's Guide

Importing Contacts Using Web Config