> Preparing the Printer and Making Initial Settings > Preparing and Setting Up the Printer According to Use > Contacts Registration > Registering Contacts When Multiple Fax Boards are installed > Registering Contacts from Web Config When Multiple Fax Boards are installed

Registering Contacts from Web Config When Multiple Fax Boards are installed

When registering a recipient to the contacts list, you can also add the line setting.

On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

You can check the printer's IP address using the following menu.
- Network connected to the printer's built-in LAN port
  
  Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
- Network connected to the Wireless LAN Interface-P1
  
  Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select the following menu.

Scan/Copy tab or the Fax tab > Contacts
Select the number that you want to register, and then click Edit.
Enter the Name and Index Word.
Select Fax as the Type option.

Note:

You cannot change the Type option after registration is complete. If you want to change the type, delete the destination and then register it.
Select a line in Select Line, enter the fax number in Fax Number, and then click Apply.

Note that Select Line is set to G3-Auto by default.

AM-C10000 Series