> Administrator Information > Network Security Settings > SSL/TLS Communication with the Printer > Configuring Basic SSL/TLS Settings

Configuring Basic SSL/TLS Settings

If the printer supports the HTTPS server feature, you can use an SSL/TLS communication to encrypt communications. You can configure and manage the printer using Web Config while ensuring security.

Configure encryption strength and redirect feature.

On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

You can check the printer's IP address using the following menu.
- Network connected to the printer's built-in LAN port
  
  Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
- Network connected to an optional Ethernet board
  
  Settings > General Settings > Network Settings > Additional > Network Status > Wired LAN Status
- Network connected to the Wireless LAN Interface-P1
  
  Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status
Enter the administrator password to log in as an administrator.
Select the following menu.

Network Security tab > SSL/TLS > Basic
Select a value for each item.
- Encryption Strength
  
  Select the level of encryption strength.
- Redirect HTTP to HTTPS
  
  Select enable or disable. The default value is "Enable".
- TLS 1.0
  
  Select enable or disable. The default value is "".
  
  This item is not displayed for additional networks.
- TLS.1.1
  
  Select enable or disable. The default value is "Disable".
  
  This item is not displayed for additional networks.
- TLS.1.2
  
  Select enable or disable. The default value is "Enable".
  
  This item is not displayed for additional networks.
Click Next.

A confirmation message is displayed.
Click OK.

The printer is updated.

AM-C10000 Series

User's Guide

Configuring Basic SSL/TLS Settings