Creating Sub-Administrators

1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

   You can check the printer's IP address using the following menu.

   • Network connected to the printer's built-in LAN port
     Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
   • Network connected to the Wireless LAN Interface-P1
     Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select the following menu.

   Product Security tab > Administrator Settings > User Settings

4. Select the number you want to register or edit, and then select Edit.

5. Configure each item.

   • User Name :
     Enter the name displayed on the user name list between 1 and 20 characters long in ASCII (0x20-0x7E).
   • Password :
     Enter a password between 8 and 70 characters long in ASCII (0x20-0x7E). When initializing the password, leave it blank.
   • Select the check box to enable or disable each function.
     Select the administrator privilege functions you want to grant to sub-administrators. The functions selected here are displayed when you login to Web Config as a sub-administrator.

6. Click OK.

   Return to the user setting list after a specific length of time.

   Notify the sub-administrator about the registered administrator information.

   If Lock Setting is enabled, select the sub-administrator name from Admin Login to log in.