AM-C10000 Series

User's Guide

> Introduction of Advanced Features > SRA3/12x18in Capability Expansion > Enabling the SRA3/12x18in Capability Expansion - Windows

Enabling the SRA3/12x18in Capability Expansion - Windows

Enable the SRA3/12x18in Capability Expansion feature in the printer driver.

Note:

Log on to your computer as an administrator.

  1. Open the Optional Settings tab from the printer properties.

    • Windows 11/Windows Server 2025
      Click on the start button, and then select Settings > Bluetooth & devices > Printers & scanners. Select the printer > Printer properties, and then click the Optional Settings tab.
    • Windows 10/Windows Server 2022/Windows Server 2019/Windows Server 2016
      Click on the start button, and then select Windows System > Control Panel > View devices and printers in Hardware and Sound. Right-click on your printer, or press and hold it, select Printer properties, and then click the Optional Settings tab.
    • Windows 8.1/Windows Server 2012 R2
      Select Desktop > Settings > Control Panel > View devices and printers in Hardware and Sound. Right-click on your printer, or press and hold it, select Printer properties, and then click the Optional Settings tab.
    • Windows 7/Windows Server 2008 R2
      Click the start button, and select Control Panel > Hardware and Sound > Scanner and Cameras, and then check if the printer is displayed. Right-click on your printer, select Printer properties, and then click the Optional Settings.
    • Windows Server 2008
      Click the start button, and then select Control Panel > Printers in Hardware and Sound. Right-click on your printer, select Property, and then click Optional Settings.

  2. Select Manual Settings, and then click Settings.

  3. Select the SRA3/12×18in Capability Expansion checkbox.

  4. Click OK.