AM-C10000 Series

User's Guide

> Preparing the Printer and Making Initial Settings > Creating and Configuring a Network Connection > Connecting the Printer to the Network > Connecting to the Network from the Control Panel > Connecting to the Wireless LAN (Wi-Fi) > Configuring Wi-Fi Settings Using Push Button Setup (WPS)

Configuring Wi-Fi Settings Using Push Button Setup (WPS)

You can automatically connect to a wireless router by pressing a button on the wireless router, if the following conditions are met.

  • The wireless router is compatible with WPS (Wi-Fi Protected Setup).

  • The current Wi-Fi connection was established by pressing a button on the wireless router.

Note:

If you cannot find the button or you are setting up using the software, see the documentation provided with the wireless router.

  1. Tap on the home screen.

    Note:

    If is displayed on the printer screen, tap this icon and log in as an administrator.

  2. Tap Wi-Fi.

    If you previously configured Ethernet settings, review the message and then tap Yes.

  3. Select Start Setup.

  4. Tap Push Button Setup(WPS).

  5. Follow the on-screen instructions.

    If you want to check the network connection status for the printer after setup is complete, see the related information below

    Note:

    If connection fails, restart the wireless router, move it closer to the printer, and try again. If it still does not work, print a Network Connection Report and review the solutions.

Related Information