AM-C10000 Series

User's Guide

> Preparing the Printer and Making Initial Settings > Creating and Configuring a Network Connection > Changing the Administrator Password > Changing the Administrator Password from the Computer

Changing the Administrator Password from the Computer

You can set the administrator password using Web Config. When using Web Config, it is necessary to connect the printer to the network. If the printer is not connected to the network, connect it to the computer with an Ethernet cable directly.

  1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

    You can check the printer's IP address using the following menu.

    • Network connected to the printer's built-in LAN port
      Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
    • Network connected to an optional Ethernet board
      Settings > General Settings > Network Settings > Additional > Network Status > Wired LAN Status
    • Network connected to the Wireless LAN Interface-P1
      Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status

  2. Enter the administrator password to log in as an administrator.

    Note:

    The default User Name is blank.

    See the related information below for the default administrator password.

    Select Log in, enter the administrator password, and click OK.

  3. Select Product Security>Change Administrator Password.

  4. Enter the current password in the Current password field, and then enter the new password in the New Password and Confirm New Passwordfields. Enter the User Name, if necessary.

  5. Select OK.

    Note:

    To restore the administrator password its default, select Restore Default Settings on the Change Administrator Password screen.