Configuring an IEEE802.1X Network

1. On a computer connected to the same network as the printer, open a browser and enter the printer's IP address.

   You can check the printer's IP address using the following menu.

   • Network connected to the printer's built-in LAN port
     Settings > General Settings > Network Settings ( > Standard) > Network Status > Wired LAN/Wi-Fi Status
   • Network connected to an optional Ethernet board
     Settings > General Settings > Network Settings > Additional > Network Status > Wired LAN Status
   • Network connected to the Wireless LAN Interface-P1
     Settings > General Settings > Network Settings >Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select the following menu.

   Network Security tab > IEEE802.1X > Basic

4. Enter a value for each item.

   If you want to use the printer on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.

   Note:

   You can share settings between Ethernet and Wi-Fi.

5. Click Next.

   A confirmation message is displayed.

6. Click OK.

   The printer is updated.