Select the menus on the control panel as described below.
Settings > General Settings > Network Settings
Network Settings
Connection Settings
Connect the printer to the network over a wireless LAN. Select your connection method and follow the on-screen instructions.
Wi-Fi
Wi-Fi Setup Wizard
Configures Wi-Fi settings by having you enter the SSID and password.
Push Button Setup(WPS)
Configures Wi-Fi settings via Push Button Setup(WPS).
Advanced
Displays the advanced network menu.
Others
PIN Code Setup(WPS)
Configures Wi-Fi settings via PIN Code Setup(WPS).
Disable Wi-Fi
Disconnects the connection to the Wi-Fi router.
Ethernet
Set up or change to a network connection that uses a LAN cable and hub. When this setting is used, any Wi-Fi (Infrastructure) connection is disabled.
Wi-Fi Direct
iOS
Displays a QR code to connect a mobile device using Wi-Fi Direct.
Android
Displays a QR code to connect a mobile device using Wi-Fi Direct.
Other OS Devices
Displays the SSID and password to connect using Wi-Fi Direct.
Easy Connect with App
Establish a wireless LAN connection using the wireless LAN information for your computer or mobile device.
Network Status
Wired LAN/Wi-Fi Status
Displays the printer's network information.
Wi-Fi Direct Status
Displays the Wi-Fi Direct setting information.
Email Server Status
Displays the mail server setting information.
Print Status Sheet
Prints a network status sheet.
Information about Ethernet, Wi-Fi, Wi-Fi Direct, and other network parameters is printed on two or more pages.
Connection Check
Checks the current network connection and prints a report. If there are any problems with the connection, see the report for solutions.
Advanced
Device Name
Changes the device name to any name from 2 to 53 characters long.
TCP/IP
Configures the IP settings, if the IP address is static.
For automatic configuration, use the IP address assigned by DHCP.
To set manually, switch to Manual and then enter the IP address you want to assign.
Proxy Server
Set this if you are using a proxy server in your network environment and want to set it for the printer as well.
Email Server
Set up the email server information and test connections when using the email forwarding feature.
IPv6 Address
Sets whether or not to enable IPv6 addressing.
MS Network Sharing
Set this when you want to use the file sharing feature.
Link Speed & Duplex
Select an appropriate Ethernet speed and duplex setting. If you select a setting other than Auto, make sure the setting corresponds to the settings on the hub you are using.
Redirect HTTP to HTTPS
Enables or disables redirecting from HTTP to HTTPS.
