Select a color setting whether you normally print in B&W or Color. Saved Settings applies settings you have made for saving to storage.
Paper Setting
Specify the paper source settings which you want to print on.
Reduce/Enlarge
Configures the magnification ratio of the enlargement or reduction. Tap the value and specify the magnification within a range of 25 to 400%.
Saved Settings
Applies settings you have made for saving to storage.
Auto
Automatically enlarges or reduces the data to fit to the paper size you selected.
Reduce to Fit Paper
Prints the data at a smaller size than the Reduce/Enlarge value to fit within the paper size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the edges of the paper.
Free Form(mm)
Specify the vertical and horizontal lengths of the paper to enlarge or reduce it.
Free Form(%)
Specify different magnifications for the vertical and horizontal lengths of the original to enlarge or reduce it.
Actual Size
Prints at 100 % magnification.
A4→A5 and others
Automatically enlarges or reduces the data to fit to a specific paper size.
2-Sided
Select 2-sided layout.
2-Sided
Select whether or not to print using 2-sided.
Binding
Select the binding position for 2-sided printing.
Multi-Page
Select the print layout.
Single Page
Prints single-sided data onto a single sheet.
2-up
Prints two single-sided data onto a single sheet in 2-up layout. Select the layout order.
4-up
Prints four single-sided data onto a single sheet in 4-up layout. Select the layout order.
Finishing
Finishing
Select Collate (Page Order) to print multi-page documents collated in order and sorted into sets. Select Group (Same Pages) to print multi-page documents by acquiring the same numbered pages as the group.
Booklet
Booklet
Specify these settings when you want to create a booklet from your printouts.
Booklet
Allows you to create a booklet from your printouts.
Binding
Select the binding position of the booklet.
Binding Margin
Specify the binding margin. You can set 0 to 50 mm as the binding margin in 1mm increments.
Cover
Allows you to add covers to the booklet.
Paper Setting
Select the paper source in which you loaded the paper for the covers.
Front Cover
Specify the print settings for the front cover. If you do not want to print on the front cover, select Do not Print.
Back Cover
Specify the print settings for the back cover. If you do not want to print on the back cover, select Do not Print.
