Set up the basic items such as IP Address, Subnet Mask, Default Gateway.
This section explains the procedure for setting a static IP address.
If you want to configure settings on a printer with Lock Setting enabled, you must log in as an administrator.
If 
is displayed on the printer screen, tap this icon and log in as an administrator.
Turn on the printer.
Select Settings > General Settings > Network Settings > on the home screen on the printer's control panel.
Select Advanced > TCP/IP.
Select Manual for Obtain IP Address.
When you set the IP address automatically by using the DHCP function of the router, select Auto. In that case, the IP Address, Subnet Mask, and Default Gateway on steps 5 and 6 are also set automatically, so go to step 7.
Enter the IP address, and then select OK.
Make sure you see the IP address under Obtain IP Address.
Set up the Subnet Mask and Default Gateway.
Make sure you see the Subnet Mask and Default Gateway.
If the combination of the IP Address, Subnet Mask and Default Gateway is incorrect, Start Setup is inactive and cannot proceed with the settings. Confirm that there is no error in the entry.
Enter the IP address for the primary DNS server, and then select OK.
Make sure you see the Primary DNS.
When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address. Then, enter the secondary DNS server address directly. If you select Auto, go to step 9.
Enter the IP address for the secondary DNS server, and then select OK.
Make sure you see the Secondary DNS.
Tap Start Setup.