Configuring Wi-Fi Direct Settings

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the printer's IP address from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Network tab >Wi-Fi Direct

4. Sets each item.

   • Wi-Fi Direct
     You can specify whether or not to enable the Wi-Fi Direct.
   • SSID
     You can change the SSID (Network Name).whether or not to enable
   • Password
     When changing the Wi-fi Direct password, enter a new password.
   • Frequency Range
     Select the frequency range to be used in Wi-Fi Direct.
   • IP Address
     Select the IP Address setting method from Auto or Manual.

5. Click Next.

   A confirmation message is displayed.

   Note:

   To reset the Wi-Fi Direct settings, click the Restore Default Settings button.

6. Click OK.

   The printer is updated.