Configuring a Server Certificate for the Printer

1. Enter the printer's IP address into a browser to access Web Config.

   Enter the IP address of the network (standard/additional) you want to configure from a computer that is connected to the same network as the printer.

   You can check the IP address of the printer from the following menu.

   Settings > General Settings > Network Settings > (Standard or Additional) > Network Status > Wired LAN/Wi-Fi Status

2. Enter the administrator password to log in as an administrator.

3. Select in the following order.

   Network Security tab > SSL/TLS > Certificate

4. Specify a certificate to use on Server Certificate.

   • Self-signed Certificate
     A self-signed certificate has been generated by the printer. If you do not obtain a CA-signed certificate, select this.
   • CA-signed Certificate
     If you obtain and import a CA-signed certificate in advance, you can specify this.

5. Click Next.

   A confirmation message is displayed.

6. Click OK.

   The printer is updated.