IEEE802.1X Network Setting Items

IEEE802.1X (Wired LAN)

You can enable or disable settings of the page (IEEE802.1X > Basic) for IEEE802.1X (Wired LAN).

IEEE802.1X (Wi-Fi)

The connection status of IEEE802.1X (Wi-Fi) is displayed.

Displayed when the optional Wireless LAN Interface-P1 is installed.

Connection Method

The connection method of a current network is displayed.

EAP Type

Select an option for an authentication method between the printer and a RADIUS server.

EAP-TLS

You need to obtain and import a CA-signed certificate.

PEAP-TLS

EAP-TTLS

You need to configure a password.

PEAP/MSCHAPv2

User ID

Configure an ID to use for an authentication of a RADIUS server.

Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Password

Configure a password to authenticate the printer.

Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. If you are using a Windows server as a RADIUS server, you can enter up to 127 characters.

Confirm Password

Enter the password you configured for confirmation.

Server ID

You can configure a server ID to authenticate with a specified RADIUS server. Authenticator verifies whether a server ID is contained in the subject/subjectAltName field of a server certificate that is sent from a RADIUS server or not.

Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Certificate Validation (Wired LAN Only)

You can set certificate validation regardless of the authentication method. Import the certificate in CA Certificate.

This item only supports wired LAN connections.

A CA Certificate is required to connect to a Wi-Fi network with IEEE802.1X.

Anonymous Name

If you select PEAP-TLS, EAP-TTLS or PEAP/MSCHAPv2 for EAP Type, you can configure an anonymous name instead of a user ID for a phase 1 of a PEAP authentication.

Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters.

Encryption Strength

You can select one of the followings.

High

AES256/3DES

Middle

AES256/3DES/AES128/RC4