Power LED

This turns on when the printer is on.

Flashes during power-off process or while updating firmware.

Error LED

• On

  Indicates that the printer is temporarily unable to print, such as when no roll paper is loaded or the roll paper cover is open.

• Flashing

  Indicates an error such as a power failure. To clear this type of error, you need to turn the printer off and then back on.

Paper LED

This LED turns on when the printer is nearly out of or has run out of roll paper.

Ethernet LED

• On

  Indicates that the LAN cable is connected and the printer is ready to communicate.

• Flashing

  Indicates that the printer is temporarily unable to communicate, such as when it is obtaining an IP address after the LAN cable is connected.

• Off

  Indicates that the printer is not connected to Ethernet. This LED also stays off while the printer is connected to a Wi-Fi.

Wi-Fi LED

• On

  Indicates that the printer is connected to Wi-Fi and is ready to communicate.

• Flashing

  Indicates that the printer is temporarily unable to communicate, such as when it is obtaining an IP address after being connected to Wi-Fi.

• Off

  Indicates that the printer is not connected to Wi-Fi. This LED also stays off while the printer is connected to a wired LAN.

Bluetooth LED

• On

  Indicates that the printer is connected via Bluetooth and is ready to communicate.

• Flashing

  Indicates that the printer is waiting to be paired with another device.

• Off

  Indicates that the printer is not connected via Bluetooth.