 |
 |
|
||
 |
||||
Printer Specifications
Mechanical
|
Printing method:
|
Serial ink jet
|
|
|
Printing speed:
|
Print quality: Normal/Draft
|
200 cps at 10 cpi
|
|
Print quality: Super Draft
|
300 cps at 10 cpi
|
|
|
Printing direction:
|
Bidirectional, unidirectional
|
|
|
Printable columns:
|
80 columns (at 10 cpi)
|
|
|
Resolution:
|
360 × 360 dpi
|
|
|
Feeding method:
|
Push tractor feed (rear paper entry)
|
|
|
Feeder:
|
Rear push tractor
|
|
|
Paper feed speed:
|
Normal mode:
|
|
|
Intermittent
|
25.4 mm/line at 1-inch line spacing
|
|
|
Continuous feed
|
294.64 mm/second
(11.6 inches/second) |
|
|
Reliability:
|
Total print volume
|
1.2 million sheets (6.5 × 7.5 inches)
|
|
Dimensions and weight:
|
Height
|
224 mm (8.82 inches)
|
|
Width
|
464 mm (18.27 inches)
|
|
|
Depth
|
465 mm (18.30 inches)
|
|
|
Weight
|
Approx. 12.2 kg (26.9 lb)
(without the ink cartridges) |
|
|
Ink cartridges:
|
Color: GP-C800
|
Black, Yellow, Magenta, Cyan
|
|
Color: GP-M800
|
Black
|
|
|
Cartridge life
|
Use within 6 months after installing in the printer.
|
|
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F) |
|
Electronic
|
Interfaces:
|
One standard bidirectional, 8-bit, parallel interface with IEEE-1284 nibble mode support, ECP mode, and one USB2.0 (High Speed) interface.
|
|
Buffer:
|
64 KB
|
Electrical
|
110 V
|
|
|
Input voltage range
|
99 to 121 V
|
|
Rated frequency range
|
50 to 60 Hz
|
|
Input frequency range
|
49 to 61 Hz
|
|
Rated current
|
0.4 A
|
|
Power consumption
|
Approx. 18 W (ISO/IEC 10561 letter pattern)
Approx. 2.3 W in sleep mode*
|
* When three minutes pass in the following conditions, the printer enters sleep mode.
- No error
- There is no data in input buffer
- Ink cartridge covers are closed
- Top cover is closed
- No error
- There is no data in input buffer
- Ink cartridge covers are closed
- Top cover is closed
Note:|
Check the label on the back of the printer for the voltage of your printer.
|
Environmental
|
Temperature
(without condensation) |
Humidity
(without condensation) |
|
|
Operation
|
10 to 35 ˚C (50 to 95 ˚F)
|
20 to 80% RH
|
|
Storage
|
-20 to 40 ˚C (-4 to 104 ˚F)
|
5 to 85% RH
|
Paper
Note:|
Do not load paper that has been folded or is damaged, wrinkled, or curled.
When printing on light-weight continuous paper, avoid environments that are subject to high humidity.
Medicine bags may become dirty when printing in an environment with high humidity if the backside of the medicine bags is a polyvinyl resin.
|
Continuous paper:
|
Width
|
76.2 to 241.3 mm (3.0 to 9.5 inches)
|
|
Length (one page)
|
38.1 to 558.8 mm (1.5 to 22.0 inches)*
|
|
Thickness
|
0.065 to 0.14 mm (0.0025 to 0.0055 inch)
|
|
Weight
|
52 to 129 g/m² (14 to 34.3 lb)
|
|
Quality
|
Plain paper, Reclaimed paper
Not broken, torn, turned over, or wrinkled |
* You cannot print on continuous paper if 139.7 mm (5.5 inches) or less remains.
Labels (continuous base sheet):
|
Label size
|
23.8 × 63.5 mm (15/16 × 2.5 inches) minimum
2.5 mm (0.1 inch) corner radius, minimum |
|
Base sheet width
|
76.2 to 241.3 mm (3.0 to 9.5 inches)
|
|
Base sheet length
|
38.1 to 558.8 mm (1.5 to 22.0 inches)
|
|
Base sheet thickness
|
0.07 to 0.09 mm (0.0028 to 0.0035 inch)
|
|
Total thickness
|
0.155 to 0.19 mm (0.0061 to 0.0075 inch)
|
|
Label weight
|
64 g/m² (17 lb)
|
Medicine bag (continuous):
|
Width
|
76.2 to 241.3 mm (3.0 to 9.5 inches)
|
|
Length (one page)
|
38.1 to 558.8 mm (1.5 to 22.0 inches)*
|
|
Thickness
|
0.11 to 0.13 mm (0.0043 to 0.0051 inch)
|
|
Weight
|
63 to 104.7 g/m² (17 to 28 lb)
|
|
Quality
|
Plain paper, Reclaimed paper
Not broken, torn, turned over, or wrinkled |
* You cannot print on continuous paper if 139.7 mm (5.5 inches) or less remains.
Pre-printed Paper
Pre-printed paper is paper that has ruled lines, letters, or figures printed in the top and bottom margins. The middle of the paper is left blank. The margin areas are often used for letterheads, borders, and so on. You can make your own pre-printed paper or you can purchase it.
You cannot pre-print in the areas shown with diagonal lines in the illustration below.
Area measurements
|
A
|
12.5 mm (0.492 inch)
|
|
B
|
6 mm (0.236 inch)
|
|
C
|
2 mm (0.079 inch)
|
Printable area
Continuous paper:
|
A
|
The minimum top and bottom margins above and below the perforation are 2.0 mm (0.079 inch) each.
|
|
B
|
The minimum left and right margins are 13 mm (0.51 inch) each.
The maximum paper width is 241.3 mm (9.5 inches) and the maximum printable width is 203.2 mm (8.0 inches).
For continuous paper wider than 229.2 mm (9.02 inches), the right margins increase proportionally to match the width of the paper.
|
Label (continuous base sheet):
|
A
|
2 mm (0.0787 inch) or more
|
|
B
|
13 mm (0.512 inch) or more
|