DS-1760WN

User's Guide

> Adding or Replacing the Computer or Devices > Re-setting the Network Connection > Changing the Connection Method to the Computer > Changing the Network Connection from Wi-Fi to Ethernet

Changing the Network Connection from Wi-Fi to Ethernet

Follow the steps below to change from a Wi-Fi connection to an Ethernet connection.

  1. Check the setting information required to connect.

    Before Making Network Connection

  2. Select Settings > Network Settings > Advanced on the scanner's control panel, and then set the required information.

    Assigning the IP Address

    Setting the Proxy Server

  3. Select Network Settings > Wired LAN Setup, and then follow the on-screen instructions to disable the wireless LAN connection.

  4. Connect the scanner to the network by using a LAN cable, and then check the connection.

    Connecting to Ethernet