Make sure there is enough space in front of the scanner for the ejected originals.
Make sure the scanner position light (
) is on.
If the scanner position light () is off, pull the scanner position selector to tilt the scanner back.
Open the input tray.
Raise the input tray extension.
Move the edge guides to the edges of the input tray.
Place the passport in the Passport Carrier Sheet.
Place the passport in the Passport Carrier Sheet with the side to be scanned facing up and with the thicker side of the passport facing the leading edge.
Place the Passport Carrier Sheet with the side to be scanned facing up and with the leading edge facing into the ADF.
Insert the paper into the ADF until it meets resistance.
Align the edge guides with the Passport Carrier Sheet so that there are no gaps. Otherwise, the Passport Carrier Sheet may be fed skewed.
If the edge guides are too far apart or too tight, the original may not be fed correctly. The edge guides should be aligned so that they lightly touch the edges of the original.
When scanning a Passport Carrier Sheet, support the top by hand to prevent the Passport Carrier Sheet from falling out of the ADF.
If the ejected originals hit the surface of the table on which the scanner is placed and this affects the scanned image, move the scanner to the edge of the table so that the ejected originals can drop and catch them directly.
When scanning a Passport Carrier Sheet, make the appropriate settings on the Epson Scan 2 screen.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.
On the Epson Scan 2 screen, use one of the following methods to turn off Detect Double Feed.
· Select Passport in Scan Settings
· On the Main Settings tab, set Detect Double Feed to Off
See the Epson Scan 2 help for details.
Do not use a scratched Passport Carrier Sheet or a Passport Carrier Sheet that has been scanned more than 3,000 times.
Only use a Passport Carrier Sheet designed for your scanner. The Passport Carrier Sheet is automatically recognized by the scanner by detecting three small rectangular holes on the leading edge. Keep the holes in the Passport Carrier Sheet clean and uncovered.
