Some items may not be available depending on the scanning method you have selected or other settings you have made.
Menu Options for Scanning
Color Mode
Select whether to scan in color or in monochrome.
File Format
Select the file format.
Page Setting
When you select PDF, Compact PDF, PDF/A, Compact PDF/A, or TIFF as the file format, select whether to save all originals as one file (multi-page) or save each original separately (single page).
Compression Ratio
Select how much to compress the image.
PDF Settings
When you have selected PDF as the save format setting, use these settings to protect PDF files.
To create a PDF file that requires a password when opening, set Document Open Password. To create a PDF file that requires a password when printing or editing, set Permissions Password.
Resolution
Select the scanning resolution.
2-Sided
Scan both sides of the original.
Orientation (Original):
Select the orientation of the original.
Binding(Original):
Select the binding direction of the original.
Scan Area
Select the scan area. To scan at the maximum area of the scanner glass, select Max Area.
Orientation (Original):
Select the orientation of the original.
Original Type
Select the type of your original.
Orientation (Original)
Select the orientation of the original.
Mixed Size Originals
You can place the following combination of sizes in the ADF at the same time.
A3 and A4
B4 and B5
A4 and A5
When using these combinations, originals are scanned at the actual size of the originals. Place your originals by aligning the width of the originals as shown below.
Density
Select the contrast of the scanned image.
Remove Background
Select the darkness of the background. Tap + to lighten (whiten) the background and tap - to darken (blacken) it.
If you select Auto, the background colors of the originals are detected, and they are removed or lightened automatically. It is not applied correctly if the background color is too dark or not detected.
Remove Shadow
Remove the shadows of the original that appear in the scanned image.
Frame:
Remove the shadows at the edge of the original.
Center:
Remove the shadows of the binding margin of the booklet.
Remove Punch Holes
Remove the punch holes that appear in the scanned image. You can specify the area to erase the punch holes by entering a value in the box on the right.
Erasing Position:
Select the position to remove the punch holes.
Orientation (Original):
Select the orientation of the original.
Skip Blank Pages
Skip blank pages when scanning if there are any in the originals.
If the result is not what you expected, adjust detection level.
Note:
Some pages may be incorrectly skipped as blank pages.
Continuous Scan(ADF)
You can place a large number of originals in the ADF in batches, and scan them as a single scanning job.
ID Card
Scans both sides of an ID card using the scanner glass, and then saves them in one image.
To scan both sides, follow the steps below.
1. Place the ID card facing down and start scanning.
2. After scanning this side, turn it over, place it back on the scanner glass, and then tap Start Scanning.
3. When scanning is complete, tap Last Original to save the image.
Note:
When using this feature, the output image size differs depending on the settings in Settings > General Settings > Basic Settings > Original Size Auto Detection Option.
When Metric Size Priority is selected: A4
When Inch Size Priority is selected: Letter
When K Size Priority is selected: 16K
Orientation (Original):
Select the orientation of the original.
Erase Red Color
Remove red notes from a scanned image.
This item is not available when using the Computer menu.
