Slows down the feeding speed whenever scanning. When set to On, the icon changes to 
.
Enable this in the following situations:
When originals jam frequently
When loading thin originals
When scanning different types or sizes of originals at once
If you feel that the scanner is noisy
Set the operation when any double feed is detect.
Immediate: Stops feeding immediately after any double feed is detected.
After Eject: Originals detected as double feed are scanned as is, and the subsequent feed of originals is temporarily stopped.
If the scanned image has no problem, you can resume scanning as is.
Skips double feed detection once and continues scanning. When set to On, the icon changes to 
.
Enable this to scan originals that are detected as double feeds, for example plastic cards or envelopes.
Reduces damage to the originals by stopping scanning immediately when the following status is detected.
A feeding error for the originals occurs
Originals are fed askew
Select the detection level to enable this feature. See the table below for details on each level.
|
Level |
Description |
|
|---|---|---|
|
On-Low |
Lower the sensitivity to detect the skew of the originals. |
|
|
On-Medium |
Detect the skew of the stapled originals and the skew that On-Low could not detect. |
|
|
On-High |
Increase the sensitivity to detect the skew of the originals. |
|
This function does not always prevent damage of originals.
Depending on the condition of the originals being fed, feeding errors cannot be detected.
Depending on the original, the condition of feeding, or the level you set, this feature may not work correctly.
Select Off to disable the feature when scanning plastic cards or thick paper.
When misdetection occurs frequently, lower the level of this feature.
Some originals may be misdetected as feeding errors, such as irregular shaped originals or originals scanned askew.
When loading multiple originals, make sure to align the leading edge of the originals. Originals may be misdetected as feeding errors if the edges of the originals are not aligned, even if they are scanned correctly.
To scan the originals without skewing, adjust the edge guides to fit the originals before scanning.
Detects dirt on the glass surface inside the scanner. You can select the level of the detection.
Depending on the dirt, this feature may not work correctly.
Detects a double feed error when multiple originals are fed and stops scanning.
Depending on the original, such as envelopes, plastic cards, originals with labels or stickers, and so on, this feature may not work correctly.
Set the timeout when using Automatic Feeding Mode.
This setting is only available when scanning from "Network Folder/FTP", "Email", "Cloud", or "USB Drive". You can set the time to finish scanning automatically when "Automatic Feeding Mode" is set to "On".
Check destination before scanning.