DS-790WN

User's Guide

> Required Settings for Scanning > Using Document Capture Pro Server > Setting Server Mode

Setting Server Mode

To use Document Capture Pro Server, set up as follows.

  1. Access Web Config and select the Scan tab > Document Capture Pro.

  2. Select Server Mode for Mode.

  3. Enter the address of the server with Document Capture Pro Server installed on it for Server Address.

    Enter between 2 and 255 characters in either IPv4, IPv6, host name or FQDN format. For FQDN format, you can use alphanumeric characters in ASCII (0x20-0x7E) and "- " except for at the beginning and end of the address.

  4. Click OK.

    The network is re-connected, and then the settings are enabled.