Placing Laminated Cards

1. Slide out the output tray and raise the stopper.

   

2. Slide the edge guides on the input tray all the way out.

   

3. Load the laminated cards into the input tray facing down with the top edge facing into the ADF.

   Slide the laminated cards into the ADF until they meet resistance.

   

4. Slide the edge guides to fit the edge of the laminated cards.

   
   Note:

   To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.

   When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.

   • To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan laminated card. See the Epson Scan 2 help for details.

   • Select the Main Settings tab > Detect Double Feed > Off. See the Epson Scan 2 help for details.

     If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from the ADF and then reload it, tap DFDS Function on the control panel’s screen to set it to On which disables Detect Double Feed for the next scan, and then scan again. The DFDS Function (Double Feed Detection Skip function) only disables Detect Double Feed for one sheet.