This method allows you to connect the scanner directly to devices without an access point. The scanner acts as an access point.
When you connect from a computer or smart device to the scanner using an AP mode connection, the scanner is connected to the same Wi-Fi network (SSID) as the computer or smart device and communication is established between them. Since the computer or smart device is automatically connected to other connectable Wi-Fi networks if the scanner is turned off, it is not connected to the previous Wi-Fi network again if the scanner is turned on. Connect to the scanner’s SSID in AP mode from the computer or smart device again. If you do not want to connect every time you turn the scanner on or off, we recommend using a Wi-Fi network by connecting the scanner to an access point.
Press the 
button on the scanner’s control panel.
The 
light is lit white when AP mode connection is enabled.
Connect from a computer or smart device using the scanner's SSID and password.
You can check the SSID and password on the label stuck to the scanner.
See the documentation provided with your computer or smart device for the operating instructions.