> Administrator Information > Advanced Security Settings > Using a Digital Certificate > Configuring a CA-signed Certificate > Importing a CA-signed Certificate

Importing a CA-signed Certificate

Import the obtained CA-signed Certificate to the scanner.

Important:

Make sure that the scanner’s date and time is set correctly. Certificate may be invalid.
If you obtain a certificate using a CSR created from Web Config, you can import a certificate one time.

Access Web Config and then select the Network Security tab. Next, select SSL/TLS > Certificate, or IPsec/IP Filtering > Client Certificate or IEEE802.1X > Client Certificate.
Click Import

A certificate importing page is opened.
Enter a value for each item. Set CA Certificate 1 and CA Certificate 2 when verifying the path of the certificate on the web browser that accesses the scanner.

Depending on where you create a CSR and the file format of the certificate, required settings may vary. Enter values to required items according to the following.
- A certificate of the PEM/DER format obtained from Web Config
  - Private Key: Do not configure because the scanner contains a private key.
  - Password: Do not configure.
  - CA Certificate 1/CA Certificate 2: Optional
- A certificate of the PEM/DER format obtained from a computer
  - Private Key: You need to set.
  - Password: Do not configure.
  - CA Certificate 1/CA Certificate 2: Optional
- A certificate of the PKCS#12 format obtained from a computer
  - Private Key: Do not configure.
  - Password: Optional
  - CA Certificate 1/CA Certificate 2: Do not configure.
Click OK.

A completion message is displayed.

Note:

Click Confirm to verify the certificate information.

ES-C380W