Changing the Administrator Password from the Scanner's Control Panel

1. Select Settings on the scanner's control panel.

2. Select System Administration > Admin Settings.

3. Select Admin Password > Change.

4. Enter your current password.

   Note:

   The initial administrator password (default) at the time of purchase varies depending on the label attached to the product. If there is a "PASSWORD" label attached to the back, enter the 8-digit number shown on the label. If there is no "PASSWORD" label attached, enter the serial number on the label attached to the base of the product for the initial administrator password.

5. Enter your new password.

   The new password must be 8 to 20 characters long and only contain single-byte alphanumeric characters and symbols.

   Important:

   Be sure to remember the administrator password you set. If you forget your password, you will not be able to reset it and you will need to request help from service personnel.

6. Enter the new password again for confirmation.