|
Items |
Settings and Explanation |
|
|---|---|---|
|
IEEE802.1X (Wi-Fi) |
The connection status of IEEE802.1X (Wi-Fi) is displayed. |
|
|
Connection Method |
The connection method of a current network is displayed. |
|
|
EAP Type |
Select an option for an authentication method between the scanner and a RADIUS server. |
|
|
EAP-TLS |
You need to obtain and import a CA-signed certificate. |
|
|
PEAP-TLS |
||
|
PEAP/MSCHAPv2 |
You need to configure a password. |
|
|
EAP-TTLS |
||
|
User ID |
Configure an ID to use for an authentication of a RADIUS server. Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. |
|
|
Password |
Configure a password to authenticate the scanner. Enter 1 to 128 1-byte ASCII (0x20 to 0x7E) characters. If you are using a Windows server as a RADIUS server, you can enter up to 127 characters. |
|
|
Confirm Password |
Enter the password you configured for confirmation. |
|
|
Server ID |
You can configure a server ID to authenticate with a specified RADIUS server. Authenticator verifies whether a server ID is contained in the subject/subjectAltName field of a server certificate that is sent from a RADIUS server or not. Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters. |
|
|
Certificate Validation |
You can set certificate validation regardless of the authentication method. Import the certificate in CA Certificate. |
|
|
Anonymous Name |
If you select PEAP-TLS or PEAP/MSCHAPv2 for EAP Type, you can configure an anonymous name instead of a user ID for a phase 1 of a PEAP authentication. Enter 0 to 128 1-byte ASCII (0x20 to 0x7E) characters. |
|
|
Encryption Strength |
You can select one of the followings. |
|
|
High |
AES256/3DES |
|
|
Middle |
AES256/3DES/AES128/RC4 |
|