Bonjour Settings
|
Item |
Settings and Explanation |
|---|---|
|
Use Bonjour |
Select this to search for or use devices through Bonjour. |
|
Bonjour Name |
Displays the Bonjour name. |
|
Bonjour Service Name |
Displays the Bonjour service name. |
|
Location |
Displays the Bonjour location name. |
|
Wide-Area Bonjour |
Set whether to use Wide-Area Bonjour. |
SLP Settings
|
Item |
Settings and Explanation |
|---|---|
|
Enable SLP |
Select this to enable the SLP function. This is used with network searching in EpsonNet Config. |
WSD Settings
|
Item |
Settings and Explanation |
|---|---|
|
Enable WSD |
Select this to enable adding devices using WSD and scan from the WSD port. |
|
Scanning Timeout (sec) |
Enter the communication timeout value for WSD scanning between 3 to 3,600 seconds. |
|
Device Name |
Displays the WSD device name. |
|
Location |
Displays the WSD location name. |
LLTD Settings
|
Item |
Settings and Explanation |
|---|---|
|
Enable LLTD |
Select this to enable LLTD. The scanner is displayed in the Windows network map. |
|
Device Name |
Displays the LLTD device name. |
LLMNR Settings
|
Item |
Settings and Explanation |
|---|---|
|
Enable LLMNR |
Select this to enable LLMNR. When this is enabled, you can use name resolution without NetBIOS even if you cannot use DNS. |
SNMPv1/v2c Settings
|
Item |
Settings and Explanation |
|---|---|
|
Enable SNMPv1/v2c |
Select to enable SNMPv1/v2c. |
|
Access Authority |
Set the access authority when SNMPv1/v2c is enabled. Select Read Only or Read/Write. |
|
Community Name (Read Only) |
Enter within 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank. |
|
Community Name (Read/Write) |
Enter within 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank. |
|
Allow access from Epson tools |
Set whether to allow writing from Epson tools such as Epson Device Admin. |
SNMPv3 Settings
|
Item |
Settings and Explanation |
|
|---|---|---|
|
Enable SNMPv3 |
SNMPv3 is enabled when the box is checked. |
|
|
User Name |
Enter between 1 and 32 characters using 1 byte characters. |
|
|
Authentication Settings |
||
|
Algorithm |
Select an algorithm for an authentication for SNMPv3. |
|
|
Password |
Enter the password for an authentication for SNMPv3. Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank. |
|
|
Confirm Password |
Enter the password you configured for confirmation. |
|
|
Encryption Settings |
||
|
Algorithm |
Select an algorithm for an encryption. |
|
|
Password |
Enter the password for an encryption. Enter between 8 and 32 characters in ASCII (0x20-0x7E). If you do not specify this, leave it blank. |
|
|
Confirm Password |
Enter the password you configured for confirmation. |
|
|
Context Name |
Enter within 32 characters in Unicode (UTF-8). If you do not specify this, leave it blank. The number of characters that can be entered varies depending on the language. |
|