|
Protocol |
Description |
|---|---|
|
Bonjour Settings |
You can specify whether to use Bonjour. Bonjour is used to search for devices, print, and so on. |
|
SLP Settings |
You can enable or disable the SLP function. SLP is used for push scanning and network searching in EpsonNet Config. |
|
WSD Settings |
You can enable or disable the WSD function. When this is enabled, you can add WSD devices, and print from the WSD port. |
|
LLTD Settings |
You can enable or disable the LLTD function. When this is enabled, it is displayed on the Windows network map. |
|
LLMNR Settings |
You can enable or disable the LLMNR function. When this is enabled, you can use name resolution without NetBIOS even if you cannot use DNS. |
|
LPR Settings |
You can specify whether or not to allow LPR printing. When this is enabled, you can print from the LPR port. |
|
RAW(Port9100) Settings |
You can specify whether or not to allow printing from the RAW port (Port 9100). When this is enabled, you can print from the RAW port (Port 9100). |
|
IPP Settings |
You can specify whether or not to allow printing from IPP. When this is enabled, you can print over the Internet. |
|
FTP Settings |
You can specify whether or not to allow FTP printing. When this is enabled, you can print over an FTP server. |
|
SNMPv1/v2c Settings |
You can specify whether or not to enable SNMPv1/v2c. This is used to set up devices, monitoring, and so on. |
|
SNMPv3 Settings |
You can specify whether or not to enable SNMPv3. This is used to set up encrypted devices, monitoring, etc. |