Select the menus on the control panel as described below.
You cannot change settings that have been locked by your administrator.
Select the paper size and paper type you loaded in the paper source. You can make Favorite Paper Settings in paper size and paper type.
Select On to feed paper from the paper source set as A4 size when there is no paper source set as Letter, or feed from the paper source set as Letter size when there is no paper source set as A4.
When paper runs out, paper is automatically fed from a paper source that has the same settings as the paper settings for the print jobs. You can set automatic selection for every paper source for each function in copy, fax, or other. You cannot set everything to off.
This setting is disabled when you select a specific paper source in the paper settings for the print jobs. Depending on the paper type setting on the Main tab of the printer driver, paper may not be fed automatically.
These print settings are applied when you print by an external device without using the printer driver. The offset settings are applied when you print using the printer driver.
Adjust the top margin of the paper.
Adjust the left margin of the paper.
Adjust the top margin for the back of the page when performing 2-sided printing.
Adjust the left margin for the back of the page when performing 2-sided printing.
Select On to check the paper width before printing. This prevents printing beyond the edges of the paper when the paper size setting is incorrect, but this may lower the print speed.
Skips blank pages in the print data automatically.
Select an action to perform when a 2-sided printing error or a memory full error occurs.
On
Displays a warning and prints in single-sided mode when a 2-sided printing error occurs, or prints only what the printer could process when a memory full error occurs.
Off
Displays an error message and cancels printing.
Memory Device:
Select Enable to allow the printer to access an inserted memory device. If Disable is selected, you cannot save data to the memory device with the printer. This prevents confidential documents from being removed illegally.
File Sharing:
Select whether to give write access to the memory device from a USB-connected computer or a network-connected computer.
Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.
Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level.
Select the ink drying time you want to use when performing 2-sided printing. The printer prints the other side after printing one side. If your printout is smeared, increase the time setting.
Select On to change the print direction; Prints while the print head moves to the left and to the right. If vertical or horizontal ruled lines on your printout look blurred or misaligned, disabling this feature may solve the problem; however, doing so may reduce print speed.