Changing the Wi-Fi Direct (Simple AP) Settings Such as the SSID

1. Select Wi-Fi Setup on the home screen.

   To select an item, use the buttons, and then press the OK button.

2. Select Wi-Fi Direct.

3. Press the OK button to proceed.

4. Press the OK button to proceed.

5. Press the button to display the setting screen.

6. Select the menu item that you want to change.

   You can select the following menu items.

   • Change Network Name
     Change the Wi-Fi Direct (simple AP) network name (SSID) used for connecting to the printer to your arbitrary name. You can set the network name (SSID) in ASCII characters that is displayed on the software keyboard on the control panel.
     When changing the network name (SSID), all connected devices are disconnected. Use the new network name (SSID) if you want to re-connect the device.
   • Change Password
     Change the Wi-Fi Direct (simple AP) password for connecting to the printer to your arbitrary value. You can set the password in ASCII characters that is displayed on the software keyboard on the control panel.
     When changing the password, all connected devices are disconnected. Use the new password if you want to re-connect the device.
   • Change Frequency Range
     Change the frequency range of Wi-Fi Direct used for connecting to the printer. You can select 2.4 GHz or 5 GHz.
     When changing the frequency range, all connected devices are disconnected. Re-connect the device.
     Note that you cannot re-connect from devices that do not support 5 GHz frequency range when changing to 5 GHz.
   • Disable Wi-Fi Direct
     Disable Wi-Fi Direct (simple AP) settings of the printer. When disabling it, all devices connected to the printer in Wi-Fi Direct (Simple AP) connection are disconnected.
   • Restore Default Settings
     Restore all Wi-Fi Direct (simple AP) settings to their defaults.
     The Wi-Fi Direct (simple AP) connection information of the mobile device saved to the printer is deleted.

7. Follow the on-screen instruction.