Making Wi-Fi Settings by Entering the SSID and Password

1. Select on the home screen.

   To select an item, use the buttons, and then press the OK button.

   

2. Select Wi-Fi (Recommended).

   If the printer has already been connected by Ethernet, select Router.

3. Press the OK button to display the next screen.

   If the network connection is already set up, the connection details are displayed. Select Change Settings to change the settings.

   If the printer has already been connected by Ethernet, select Change to Wi-Fi connection., and then select Yes after checking the message.

4. Select Wi-Fi Setup Wizard.

5. Select the SSID for the wireless router.

   Note:

   • If the SSID you want to connect to is not displayed on the printer's control panel, press the button to update the list. If it is still not displayed, press the button, and then enter the SSID directly.

   • If you do not know the network name (SSID) check if the information is written on the label of the wireless router. If you are using the wireless router with its default settings, use the SSID on the label. If you cannot find any information, see the documentation provided with the wireless router.

6. Press the OK button, and then enter the password.

   Note:

   • The password is case-sensitive.

   • If you do not know the password, check if the information is written on the label of the wireless router. On the label, the password may be written "Network Key", "Wireless Password", and so on. If you are using the wireless router with its default settings, use the password written on the label.

7. When you have finished, select OK.

8. Check the settings, and then select Start Setup.

9. Close the screen.

   The screen automatically closes after a specific length of time.

   Note:

   If you fail to connect, load A4 size plain paper, and then select Print Check Report to print a connection report.

10. Press the button.