Setting Up AirPrint

Set when using AirPrint printing and scanning.

Access Web Config and select the Network tab > AirPrint Setup.

Items

Explanation

Bonjour Service Name

Enter the Bonjour service name between 1 and 41 characters in ASCII (0x20-0x7E).

Bonjour Location

Enter location information such as the printer's placement within 127 bytes or less in Unicode (UTF-8).

Geolocation

Latitude and Longitude (WGS84)

Enter the printer's location information. This entry is optional.

Enter values by using WGS-84 datum, which separates latitude and longitude with a comma.

You can enter -90 to +90 for the latitude value, and -180 to +180 for the longitude value. You can enter less than a decimal to the sixth place, and you can omit "+".

Top Priority Protocol

Select top priority protocol from IPP and Port9100.

Wide-Area Bonjour

Set whether or not to use Wide-Area Bonjour. If you use it, the printers must be registered on the DNS server to be able to search the printer over the segment.

iBeacon Transmission

Select whether to enable or disable the iBeacon transmission function. When enabled, you can search for the printer from iBeacon-enabled devices.

Require PIN Code when using IPP printing

Select whether or not to require a PIN code when using IPP printing. If you select Yes, IPP print jobs without PIN codes are not saved in the printer.

Enable AirPrint

IPP, Bonjour, AirPrint (Scan service) are enabled, and IPP is established only with secure communication.