|
|
Turns the printer on or off. Unplug the power cord after checking that the power light is off. |
|
|
When a network error occurs, pressing this button cancels the error. Hold this button down for more than five seconds to perform Wi-Fi auto setup using the WPS push button. |
|
|
Prints a network connection report allowing you to determine the causes of any problems you may have using the printer on a network. If you need more detailed network settings and connection status, hold this button down for at least five seconds to print a network status sheet. |
|
|
When you print using AirPrint or Mopria, press this button to select the paper size and type. The light ( |
|
|
Starts monochrome copying on A4 size plain paper. To increase the number of copies (by up to 30 copies), press this button within one second intervals. |
|
|
Starts color copying on A4 size plain paper. To increase the number of copies (by up to 30 copies), press this button within one second intervals. |
|
|
Stops the current operation. Hold this button down for five seconds until the |
Additional functions are available with different combinations of buttons.
|
|
Check Scanned Images Press the |
|
|
PIN Code Setup (WPS) Hold down the |
|
|
Wi-Fi Direct (Simple AP) Setup Hold down the |
|
|
Disable Network Service Turn the printer on while holding down the |
|
|
Restore Default Network Settings Turn the printer on while holding down the |
|
|
Print Nozzle Check Pattern Turn the printer on while holding down the |
/
/
) for the selected paper turns on. Before you use this button for the first time, use Web Config to set the paper size and type associated with 
button flashes to run print head cleaning.
+ 
+ 
button to print the nozzle check pattern.