> Solving Problems > The Printer Does Not Work as Expected > Paper Does Not Feed Properly > Paper Feeds at a Slant

Paper Feeds at a Slant

The following causes can be considered.

The installation location is inappropriate.

Solutions

Place the printer on a flat surface and operate in the recommended environmental conditions.

Unsupported paper is being used.

Solutions

Use paper supported by this printer.

Paper handling is inappropriate.

Solutions

Follow paper handling precautions.

The paper is loaded incorrectly.

Solutions

Load paper in the correct direction, and slide the edge guide against the edge of the paper.

Too many sheets are loaded in the printer.

Solutions

Do not load more than the maximum number of sheets specified for the paper.

The paper settings on the printer are incorrect.

Solutions

Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the printer.

Paper slips when paper dust adheres to the roller.

Solutions

Clean the roller.

ET-4850 Series L6290 Series