Mail Server Setting Items

Authentication Method

Specify the authentication method for the printer to access the mail server.

Off

Set when the mail server does not need authentication.

SMTP AUTH

Authenticates on the SMTP server (outgoing mail server) when sending the email. The mail server needs to support SMTP authentication.

POP before SMTP

Authenticates on the POP3 server (receiving mail server) before sending the email. When you select this item, set the POP3 server.

Authenticated Account

If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated account name between 0 and 255 characters in ASCII (0x20-0x7E).

When you select SMTP AUTH, enter the SMTP server account. When you select POP before SMTP, enter the POP3 server account.

Authenticated Password

If you select SMTP AUTH or POP before SMTP as the Authentication Method, enter the authenticated password between 0 and 20 characters in ASCII (0x20-0x7E).

When you select SMTP AUTH, enter the authenticated account for the SMTP server. When you select POP before SMTP, enter the authenticated account for the POP3 server.

Sender's Email Address

Enter the sender's email address such as the email address of the system administrator. This is used when authenticating, so enter a valid email address that is registered to the mail server.

Enter between 0 and 255 characters in ASCII (0x20-0x7E) except for : ( ) < > [ ] ; ¥. A period "." cannot be the first character.

SMTP Server Address

Enter between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.

SMTP Server Port Number

Enter a number between 1 and 65535.

Secure Connection

Select the encryption method of the communication to the mail server.

None

If you select POP before SMTP in Authentication Method, the connection is not encrypted.

SSL/TLS

This is available when Authentication Method is set to Off or SMTP AUTH. Communication is encrypted from the start.

STARTTLS

This is available when Authentication Method is set to Off or SMTP AUTH. Communication is not encrypted from the start, but depending on the network environment, whether the communication is encrypted or not is changed.

Certificate Validation

The certificate is validated when this is enabled. We recommend this is set to Enable. To set up, you need to import the CA Certificate to the printer.

POP3 Server Address

If you select POP before SMTP as the Authentication Method, enter the POP3 server address between 0 and 255 characters using A-Z a-z 0-9 . - . You can use IPv4 or FQDN format.

POP3 Server Port Number

If you select POP before SMTP as the Authentication Method, enter a number between 1 and 65535.