Buttons and Functions

Turns the printer on or off.

Unplug the power cord after checking that the power light is off.

When a network error occurs, pressing this button cancels the error. Hold this button down for more than five seconds to perform Wi-Fi auto setup using the WPS push button.

Prints a network connection report allowing you to determine the causes of any problems you may have using the printer on a network. If you need more detailed network settings and connection status, hold this button down for at least five seconds to print a network status sheet.

Stops the current operation.

Hold this button down for five seconds until the button flashes to run print head cleaning.

+

PIN Code Setup (WPS)

Hold down the and buttons simultaneously to start PIN Code Setup (WPS).

+

Wi-Fi Direct (Simple AP) Setup

Hold down the and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.

+

Restore Default Network Settings

Turn the printer on while holding down the button to restore the default network settings. When the network settings are restored, the printer turns on and the network status lights flash alternately.

+

Print Nozzle Check Pattern

Turn the printer on while holding down the button to print the nozzle check pattern.

+

Disable Network Service

Turn the printer on while holding down the button to disable Epson Connect settings.