Printer Settings

Select the paper size and paper type you loaded in the paper source. You can make Favorite Paper Settings in paper size and paper type.

Select On to display the paper settings screen automatically by referring to Settings > Printer Settings > Paper Source Setting > Paper Setup when paper is loaded in the paper source. If you disable this feature, you cannot print from an iPhone, iPad or iPod touch using AirPrint.

Sets the margins for PVC ID Card printing.

Adjusts the printing position of a disc by moving up, down, left, or right until it fits.

Adjusts the printing position of the inner and outer diameters of a disc. You can specify up to 120 mm for the outer diameter, and a minimum of 18 mm for the inner diameter. Depending on the setting, the disc or disc tray may be smeared with ink. Set the range to fit the printable area of your disc. The print area set here is the default value when printing photos from a memory device onto a disc.

Adjusts the printing position of a photo sticker by moving up, down, left, or right to fit.

Select On to prevent ink from smearing on your printouts, however, this may lower the print speed.

Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level.

Select On to change the print direction; Prints while the print head moves to the left and to the right. If vertical or horizontal ruled lines on your printout look blurred or misaligned, disabling this feature may solve the problem; however, doing so may reduce print speed.

Resets the Printer Settings to their defaults.