Network Settings

Configures Wi-Fi settings by having you enter the SSID and password.

Makes Wi-Fi settings by Push Button Setup (WPS).

Configures Wi-Fi settings via PIN Code Setup (WPS).

Configures Wi-Fi settings by using the Wi-Fi information on the computer or smart device.

Disconnects the connection to the Wi-Fi router.

Changes the Wi-Fi Direct SSID (network name).

Changes the password for the Wi-Fi Direct connection.

Disables the Wi-Fi Direct function.

Resets the Wi-Fi Direct settings.

Displays a QR code to connect a mobile device using Wi-Fi Direct.

Displays the SSID and password to connect using Wi-Fi Direct.

Displays the printer's Wi-Fi information.

Displays the Wi-Fi Direct setting information.

Prints a network status sheet.

The information for Wi-Fi, Wi-Fi Direct, and other network parameters is printed on two or more pages.

Checks the current network connection and prints a report. If there are any problems with the connection, see the report for solutions.

Changes the device name to any name within 2 to 53 characters.

Configures the IP settings, if the IP address is static.

For automatic configuration, use the IP address assigned by DHCP.

To set manually, switch to "Manual" and then enter the IP address you want to assign.

Set this if you are using a proxy server in your network environment and want to set it for the printer as well.