Advanced Menu Options for Copying

Select the paper source that you want to use. When Auto is selected, a suitable size is fed automatically depending on the auto detected original size and the specified magnification ratio.

Configures the magnification ratio of the enlargement or reduction. Tap the value and specify the magnification used to enlarge or reduce the original within a range of 25 to 400%.

• Auto

  Enlarge or reduce the original size automatically to the magnification of the paper size. For example, if you set the original size to A6 and set the paper size to A4, the magnification automatically adjusts to 200%.

  When there are white margins around the original, the white margins from the corner mark () of the scanner glass are detected as the scan area, but the margins at the opposite side may be cropped.

  

• Reduce to Fit Paper

  Copies the scanned image at a smaller size than the Reduce/Enlarge value to fit within the paper size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the edges of the paper.

• Actual Size

  Copies at 100 % magnification.

• A3->A4 and others

  Automatically enlarges or reduces the original to fit to a specific paper size.

Select the size of your original. When you select Auto Detect, the size of your original is automatically detected. When copying non-standard size originals, select the size closest to your original.

Select the copy layout.

• Single Page

  Copies a single-sided original onto a single sheet.

• 2-up

  Copies two single-sided originals onto a single sheet in 2-up layout. Select the layout order and the orientation of your original.

• 4-up

  Copies four single-sided originals onto a single sheet in 4-up layout. Select the layout order and the orientation of your original.

Select the type of your original. Copies in optimal quality to match the type of original.

Select how to eject the paper for multiple copies of multiple originals.

• Group (Same Pages)

  Copies the originals by page as a group.

  

• Collate (Page Order)

  Copies the originals collated in order and sorted into sets.

  

You can place the following combination of sizes in the ADF at the same time. A3 and A4; B4 and B5. When using these combinations, originals are copied at the actual size of the originals. Place your originals by aligning the width of the originals as shown below.

Select the orientation of your original.

Copies two facing pages of a booklet onto separate sheets of paper.

Select which page of a booklet to scan.

Adjust image settings.

• Contrast

  Adjust the difference between the bright and dark parts.

• Sharpness

  Adjust the outline of the image.

• Remove Background

  Adjust the density of the background color. Tap + to make it bright (white) and tap - to make it dark (black).

Select such as the binding position, margin, and orientation of your original.

Copies the scanned image at a smaller size than the Reduce/Enlarge value to fit within the paper size. If the Reduce/Enlarge value is larger than the paper size, data may be printed beyond the edges of the paper.

Removes shadows that appear around copies when copying thick paper or that appear in the center of copies when copying a booklet.

Removes the binding holes when copying.