Printer Setup

Select the paper size and paper type you loaded in the paper source.

Select On to feed paper from the paper source set as A4 size when there is no paper source set as Letter, or feed from the paper source set as Letter size when there is no paper source set as A4.

Select On to display an error message when the selected paper size does not match the loaded paper.

Select On to display an error message when the selected paper type does not match the loaded paper.

Select On to display the Paper Setting screen when loading paper in the paper source. If you disable this feature, you cannot print from an iPhone, iPad, or iPod touch using AirPrint.

Select On to reduce noise during printing, however, this may lower the print speed. Depending on the paper type and print quality settings you selected, there may be no difference in the printer's noise level. Select On to prioritize reducing operation noise. To prioritize printing speed, select On (Low Level).

Select Auto Power On to turn on the printer automatically when it receives a print or scan job over a USB-connection or a network connection. Be sure to slide out the output tray to prevent printouts from falling.

Enabling Auto Power On increases power consumption slightly in standby status when compared to turning the printer off completely. It also takes longer to turn off the power. Leave the power cord plugged in when using this feature. If you unplug the power cord, make sure the power light is turned off.

Use the Power Off Timer setting if you want the printer to automatically turn off when the print or scan job is finished and a set time period has passed with no operations performed. This is useful when printing from a remote location such as over the Internet.

Your product may have this feature or the Power Off Timer feature depending on the location of purchase.

Select this setting to turn the printer off automatically if it is not used for a specified period of time. Any increase will affect the product’s energy efficiency. Please consider the environment before making any change.

Select this setting to turn the printer off after a specified period of time when all ports including the USB port are disconnected. This feature may not be available depending on your region.

See the following website for the specified period of time.

https://www.epson.eu/energy-consumption

Your product may have this feature or the Power Off Settings feature depending on the location of purchase.

Select this setting to turn the printer off automatically when it is not used for a specified period of time. You can adjust the time before power management is applied. Any increase will affect the product’s energy efficiency. Please consider the environment before making any change.

Select the language used on the LCD screen.

Change the layout of the keyboard on the LCD screen.

Adjust the time period to enter a sleep mode (energy saving mode) when the printer has not performed any operations. The LCD screen turns black when the setting time passes.

Select Enable to allow a computer to access the printer when connected by USB. When Disable is selected, printing and scanning that is not sent over a network connection is restricted.