ET-M2120/M2120 Series

User's Guide

> Adding or Replacing the Computer or Devices > Connecting a Smart Device and Printer Directly (Wi-Fi Direct) > Disconnecting Wi-Fi Direct (Simple AP) Connection

Disconnecting Wi-Fi Direct (Simple AP) Connection

There are two methods available to disable a Wi-Fi Direct (Simple AP) connection; you can disable all connections by using the printer's control panel, or disable each connection from the computer or the smart device. This section explains how to disable all connections.

Important:

When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi Direct (Simple AP) connection are disconnected.

Note:

If you want to disconnect a specific device, disconnect from the device instead of the printer. Use one of the following methods to disconnect the Wi-Fi Direct (Simple AP) connection from the device.

  • Disconnect the Wi-Fi connection to the printer's network name (SSID).

  • Connect to another network name (SSID).

  1. Select Wi-Fi Setup on the home screen.

    To select an item, use the buttons, and then press the OK button.

  2. Select Wi-Fi Direct.

  3. Press the OK button to proceed.

  4. Press the OK button to proceed.

  5. Press the button to display the setting screen.

  6. Select Disable Wi-Fi Direct.

  7. Check the message, and then press the OK button.