See the documentation provided with your CD/DVD for more information on handling the CD/DVD or writing data.
Do not print on the CD/DVD before writing your data to it. If you do, fingerprints, dirt, or scratches on the surface may cause errors while writing data.
Depending on the CD/DVD type or printing data, smearing may occur. Try making a test print on a spare CD/DVD. Check the printed surface after waiting for one full day.
Compared to printing on genuine Epson paper, the print density is lowered to prevent ink from smearing on the CD/DVD. Adjust the print density as necessary.
Allow the printed CD/DVDs at least 24 hours to dry avoiding direct sunlight. Do not stack or insert the CD/DVDs into your device until they are completely dry.
If the printed surface is sticky even after it has dried, lower the print density.
Reprinting on the same CD/DVD may not improve the print quality.
If the disc tray or the internal transparent compartment are accidentally printed on, immediately wipe off the ink.
Depending on the print area setting, the CD/DVD or disc tray may get dirty. Make settings to print on the printable area.
You can set the print range for the CD/DVD to a minimum of 18 mm for the inner diameter, and a maximum of 120 mm for the outer diameter. Depending on the settings, the CD/DVD or disc tray may be smeared. Set within the print range for the CD/DVD you want to print.