Replacing Ink Cartridges (When Ink Light is Off)

1. Open the printer cover.

   

2. Hold down the button for 10 seconds.

   

   The ink cartridge holder moves to the replacement position.

   Note:

   To cancel ink cartridge replacement, keep the ink cartridges installed and turn off the printer.

3. When replacing the ink cartridge, gently shake the new ink cartridge four or five times and then remove it from its package.

   
   Important:

   Do not shake cartridges after opening the package, as they may leak.

4. Remove only the yellow tape.

   
   Important:

   Do not touch the sections shown in the illustration. Doing so may prevent normal operation and printing.

   

5. Squeeze the tab on the ink cartridge and pull it straight up. If you cannot remove the ink cartridge, pull it firmly.

   

6. Insert the new ink cartridge, and then press it down firmly.

   

7. Close the printer cover.

   

8. Press the button.

   Ink charging starts.

   Important:

   After installing the ink cartridge, the power and ink light will continues to flash while the printer is charging ink. Do not turn off the printer during ink charging. Charging takes approximately two minutes. If the ink charging is incomplete, you may not be able to print.

   Note:

   If the light does not turn off, try removing and reinserting the ink cartridge.